Pre-Glued Fleece Backed Edge Banding

Edge Banding provides the final touch to make your plywood or panel acquire that clean solid-wood look. Our Edge Banding is produced from real hardwoods that is pre-glued and pre-sanded to allow for easy application. We stock 13 sizes of Edge Banding in 8 different species.

Stocked in 5/8″ to 2″ wide x 250′ rolls

Edge-banding’s Advantage

Our experience with commercially made edge banding is easier to work with, faster to install, and better-looking than solid-wood edging. That’s because commercial edge banding does not require clamping, there is no messy glue squeeze-out to clean up, and has a lower profile than solid strips that are 1⁄4 “-or-so thick. Edge banding is so easy to work with, it can even be applied to curved edges. As long as the edge banding is applied correctly it will stand up to use over the years just as if it were a wood strip.

Edge Banding Species:

  • Maple,
  • Cherry
  • American Walnut
  • Teak
  • African Mahogany (Khaya)
  • Sapele
  • Okume
  • Poplar

We can also supply species that are not listed here. Please contact us for more information.

Edge Banding Specifications:

  • Thickness .034″ plus or minus .002″ based on 0.12 of hot melt
  • Standard length of continuous veneer roll – 250 lineal feet
  • Surface finish 180 grit
  • Core size 3″
  • Weight 2.5 lbs. Per roll @ 13/16″
  • Material should be stored in plastic wrap to ensure moisture stability (reducing moisture loss)

REQUEST A QUOTE

Thank you for choosing CaribTeak.com for your Exotic and Domestic Lumber Products needs. Simply fill out the form below and a representative will contact you shortly.

Feel free to copy and paste a list of the material you are inquiring about in the message area of the form. The more information you provide, like length(s), width(s), and thickness,  the quicker and more accurately we are able to exceed your expectations! Check out our Policies Page and don’t forget to check us out on Facebook!